OVERVIEW
CD-7F (Flat Panel) Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Remote button functions are included in the supplied rear connector, allowing easy page changing and memory resetting even with driving gloves on. Two additional programmable LEDs are located on the top of the housing on either side of the integrated LED shift lights.
KEEP IT SIMPLE OR GO HARDCORE
CD-7F Carbon Dashes can simplify the update of an instrument cluster or ease the instrumentation configuration of a new vehicle build. Since the CD-7F Carbon only requires a single cable for power, ground and receiving CAN data, the wiring goes from complex to a simple one plug connection. EV conversions no longer have to be concerned with adding a full set of gauges and trying to keep the wiring clean, or having to double up on sensors so that the VCU(s) and gauges both have data – The CD-7F Carbon can see everything the VCU is seeing via a single cable connection – and that means so can you!
Want to go hardcore? CD-7F Carbon Dashes make it easy. Add additional sensor data with our 22 Channel CAN Sensor Module, create custom layouts, integrate track mapping and data logging for driver coaching, see predictive and actual lap times and set user-defined prioritized alarms - it's all possible with the CD-7F Carbon Dash. Simple or Hardcore; the choice is yours and the CD-7F Carbon's capabilities are nearly limitless.
VIEW AND LOG DATA FROM OVER 250 CAN DEVICES!
The CD-7F Carbon receives channels from CAN bus inputs and it does not require special modules to read AEM EV and/or 3rd-party CAN signals. The bus configuration and messages are fully configurable; it even supports indexed messages. Custom CAN configurations can be imported via industry standard DBC files or the user can manually enter each message and channel. The user can then rename, filter, calibrate, change units and log any CAN channel, as well as direct these channels to inputs on our pre-defined or user-created templates.
ADD MORE CHANNELS WITH CAN CONVERTER MODULES
AEM EV’s 22 Channel CAN Sensor Module (PN 30-2212, sold separately) converts analog, digital and frequency inputs into an AEMnet CAN bus signal that can be transmitted to the CD-7F Carbon Dash for viewing and/or data logging, including tachometer and fuel level, wheel speed inputs for MPH, and inputs for pressure/temp sensors. Need more than 22 channels? You can daisy-chain two of the Modules together, which is ideal if you have a logging CD Dash and want to log more channels.
ADD 8 ADDITIONAL TEMP INPUTS WITH OUR 8 CHANNEL K-TYPE TEMPERATURE CAN MODULE
Our 8 Channel K-Type CAN Module (PN 30-2224, sold separately) allows racers and enthusiasts to install eight K-type thermocouple sensors onto their vehicle and transmit all 8 temp channels to a CD Carbon Digital Dash via a one-plug CAN bus connection. It's the perfect addition when monitoring battery temperatures on EV applications.
LOGGING, TRACK MAPPING, SPEEDO and ODO CAPABILITIES
CD-7F Carbon dashes are available with a 200MB on board logger (CD-7FL/LG), which provides about 24 hours of logging time at up to 1,000 Hz/channel. It will accept as many channels as are available from either of the CAN bus inputs and we have tested it to accept up to 800 channels. Individual channel log speeds are adjustable.
The CD-7F Carbon and CD-7FL Carbon are available with an internal GPS receiver and antenna (CD-7FG & CD-7FLG), which provides coordinates for creating track maps, viewing/recording lap times and split times, and seeing predictive lap times on the display with a live Gain/Loss value or for the use of a Speedometer and/or Odometer.
Racers looking for acceleration forces and vehicle dynamics channels in addition to GPS can purchase a Vehicle Dynamics Module (VDM, PN 30-2206, sold separately). The VDM includes a GPS receiver and antenna, a 3-axis gyroscope for viewing and recording roll, pitch and yaw, and a 3-axis accelerometer for collecting longitudinal, lateral and vertical acceleration.
UNLIMITED ALARMS AND WARNING TEXT
The CD-7F Carbon’s warning and alarm features put an end to obscure warning LEDs! DashDesign software features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you can program and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a system fault light.
We designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-7F Carbon triggers the alarm page whenever a user-definable condition is met. This includes the status of the channel that triggered the alarm (for example, high battery pack or inverter temps, low battery state, system faults, etc.), and if multiple alarm conditions are present, the CD-7F Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and user-prioritized scrollable feature is included for text warnings on the main pages as well.
SEVEN PAGES TOTAL, ALL CUSTOM CONFIGURABLE
The CD-7F Carbon Digital Displays are fully configurable and completely unlocked, so you will never pay for additional software features. They include seven total pages; a startup page, four main pages for viewing channels that can be toggled using a remote-mounted button, a unique ‘On-Change’ page, and a dedicated Alarm event page. All pages are 100% customizable; Use our layouts or create your own and put whatever channels you want wherever you want on the screen.
THREE EVENT TRIGGERED PAGES
Three event-based pages ensure that you do not miss any critical changes to the vehicle’s operating state. One is an alarm page. The CD-7F Carbon dash will display the alarm page whenever a user-definable condition is met. This page remains active until it is cleared by pressing a remote-mounted button.
The second event-based page is an On-Change page. The On-Change page is perfect for knowing what map you are on if you have map switching for different power levels or traction control, and for viewing lap time, split times, etc., whenever you pass the start/finish line on the racetrack (beacon must be configured one time before racing). It is perfect for seeing user-defined momentary changes without having to add additional channels to your main pages.
The third event page is a Start-Up page that is triggered every time the dash powers up. You can program whatever splash screen graphics you want, such as team, company or sponsor logos and photos.
FREE DASHDESIGN GRAPHICS EDITOR SOFTWARE
Our DashDesign Screen Editing software is free and allows users to create and customize all of the different pages in the CD-7F Carbon dash. You can assign incoming channels to the supplied layouts or create your own from scratch, the only limit is your imagination! We provide multiple layouts and themes to accommodate most styles and types of racing. We add new layouts when we update the software, and make them available for download at no charge.
